The raw water or waste water to be filtered will be pumped through the pressure vessel of Bag filter which will be consisting of filtration element ( known as Bag - PP ) of micron rating from 5u to 50u and in sizes of 5 lit and 10 lit water holding capacity. The clear filtered liquid flows continuously and can be recycled back to process or further treatment. Once the bag gets chocked with suspended solids that will generate the back-pressure and this is the right time to remove the suspended solids from bag and reuse ( depend on type of sludge ) it for specific period.
|Model||Std Size||Flow rate||MOC||Liquid Holding Capacity|
|ETPL –BFS-32||7” x 32“||20 – 25 m3/hr||UPVC||10 Lit|
|ETPL –BFS-16||7” x 16”||10-15 m3/hr||UPVC||5 Lit|
Other parts of the system
Filter Press with Electro Mechanical Plate Shifting Device :
It is Mechanised Recessed Plates type Filter Press of SIZES varies from 355 mm x 355 mm to 1200 mmx1200 mm for 7 bar Filtration Pressure with and without hydraulic closing devices.
Moc of Skeleton : Cast Iron or Mild Steel.
Moc of Filter Element : Polypropylene Cast Iron, SS 304, SS 316
The system consists of pressure compensated motorized power pack having high pressure radial triplex plunger pump, solenoid operated direction control valve, pilot operated non-return valve, differential pressure switch, relief valve, pressure gauge and double acting hydraulic cylinder having 800 mm.stroke which closes and seals the filter plates pack automatically and returns the moving head to its open position by simply pressing a button.
Cylinder Tonnages Available :
40T, 50 T, 75 T, 100 T, 125 T, 150 T, 200 T, 250 T & 400 T
Filter Press with Capstan Closing Device
This type of closing Mechanism is recommended upto 355 mm x 355 mm size Filter Presss.A screw with hand-wheel is used for closing the pack of filter plates and for final tightning
Filter Press with Ratchet Closing Device
The system consists of Ratchet Mechanism, Pinion and Gear Wheel. By applying a Ratchet lever to the pinion shaft the force is transmitted by small pinion to the larger gear-wheel which provides the final lightning on the plate pack. The system consists of Ratchet Mechanism, Pinion and Gear Wheel. By applying a Ratchet lever to the pinion shaft the force is transmitted by small pinion to the larger gear-wheel which provides the final lightning on the plate pack.
|1||Name of the Party with detailed Official address and contact nos.|
|2||Site address in detail where this plant is going to Install/ Operate|
|3||Source of Sludge – ETP/STP/ Process/Any other?|
|4||Qty of total Liquid to be handled? in Lit/day|
|5||Total Solid Concentration (mg/Lit) in Liquid or TSS value|
|6||Qty Of Sludge (solid part) generated? In Kg / day|
|7||Sludge Characteristics- pH , Viscosity, Temp etc.|
|8||Space availability in (LXBXH) - Meter|
Above data is compulsory to understand your requirement and to proceed further.
We are solution provider company in water and waste water treatment and majorly we serve our products for customers in National : Maharashtra, Delhi, Chennai, Kolkata, Bangalore, Karnataka, Madhya Pradesh, Gujarat, West Bengal, Assam, Odisha, etc International : Dubai, Oman, Saudi, Ajman , Mauritius, Madagascar, Bangladesh, Ethiopia, Malaysia, etc.